Drones/Helis iFlight Iflight Alpha A85 Hd Whoop W/Caddx Nebula Digital Hd System (Dji)

Product Description

Let’S Welcome The Iflight Alpha Series, A New Way To Fly Fpv. Ever Wanted To Try Digital Fpv On The Smallest Possible Whoop Size Quad? We Sticked The Caddx Vista And The New Caddx Nebula Cam To One Of Our New 2Inch Whoop Frames, Did Some Tuning And Tried To Find The Optimal Ratio Between Weight And Power. This Is What We Came Up With To Combine Flight Time Efficiency With Sufficient Power.

Features：

84.5 Grams (Without Battery)

Butter Smooth Xing1303 5000Kv，More Torque And Efficiency With Longer Flight Times Compared To 1105 Motors

Ducts To Protect The Sensitive Environment Or Yourself

Pre-Tuned With Smooth Cinematic Settings

Iflight Albatross 5.8G Light Antenna Upgrade (Included)

Iflight Albatross 900Mhz Light Micro Antenna Upgrade (Included With Every Crossfire Nano Rx)

Alpha A85 Hd Bnf Specs:

Succex-D 20A Whoop F4 Aio Board

Xing 1303 5000Kv Fpv Micro Motor

Wheelbase: 85Mm

Body Size: 125*125Mm

Ducted Propeller Size: 2 Inch

Fc Pattern: 25.5*25.5Mm

Fpv Cam Spacing: 14Mm

Weight: 84.5G (Without Battery)

Flight Time: 5-7 Min Cruising (4S 450Mah)

Factory Setup And Wiring Diagram:

This Bnf Comes Pre-Built And Setup With All Necessary Parameters To Bind-And-Fly. We Also Added A Basic Filter And Pid Tuning As Well As Some More Software Tweaks Enhance The Flight Experience.

Reflashed Your Drone But Didn’T Backup The Setup? Messed Up The Whole Tune And Want Our Factory Tune Back?

No Need To Worry! All Factory Dumps And Wiring Diagrams Can Be Found On Our Google Drive: Link

Alpha A85 Hd Quad Bnf Included Components And Parts

Prebuilt And Tested Quadcopter

1X Alpha 85Mm Frame

1X Caddx Nebula Digital Hd System Kit

1X Albatross Lhcp Ipex 5.8G Light Antenna

2Sets Hq 2 Inch 4-Blades (Set Of 4 – Color May Vary)

1X Iflight Lipo Strap

Fc // Succex-D 20A F4 Whoop Aio

*Size：30.5*30.5Mm

*Mounting Pattern：25.5*25.5Mm/Φ3Mm

*Connector：Micro-Usb

*Mcu：Stm32F411

*Gyro：Mpu6000

*Blackbox：8Mb

*Bec Output：5V 2A/10V 2A

*Ina Pad：Uart2 (Nr2)

*Barometer：No

*Constant Current：20A，25A（Burst）

*Input：2-5S

*Current Sensor：Yes

*Blheli：Blheli-S

*Esc Telemetry：No

*Target：Iflight_F411_Pro

*Esc Firmware：G-H-30 Bls

Additional Suggested Parts

Dji Hd Fpv Goggles

Radio Controller

Battery 4S 450Mah

Important

The Dji Remote Controller Is Recommended For Beginners Since You Won’T Need To Set Up Another Receiver, But It Is Also Optional In This Bnf Drone Because It Is Not Required In Order To Use The Fpv System. If You Don’T Choose To Use The Dji Remote Controller, You Can Choose A Receiver Option For Your Transmitter And Then Bind To Your Own Radio As Usual.