Aircraft | Model & Die-Cast Tamiya Tamiya 1/48 Supermarine Spitfire Mk.I & 10 Hp [25211]

This Cost-Effective Set Includes Item 61119 1/48 Supermarine Spitfire Mk.I And Item 32562 1/48 British Light Utility Car 10Hp In A Special Package.

Supermarine Spitfire Mk.I

• 1/48 Scale Plastic Model Assembly Kit. Fuselage Length: 191Mm, Wingspan: 235Mm.
• A Wide Selection Of Photo-Etched Parts Is Included To Depict Sight, Seatbelt Parts, Radiator Mesh And More.
• Includes One Seated Pilot Figure And Three Marking Options.
• Comes With Decals, Masking Stickers For Clear Parts, And Molded Stickers.

British Small Staff Car 10Hp

• 1/48 Plastic Assembly Kit Model. Length: 84Mm.
• Display Your Model With Either An Open Or Closed Cargo Cover.
• Comes With Decals To Depict A Variety Of Marking Options Including A Royal Air Force (Raf) Vehicle And One Driver Figure.

Supermarine Spitfire Is Probably The Most Famous British Fighter From The Second World War. It Was An All-Metal Machine With A Low Wing Configuration, Characteristic Elliptical Wings, A Classic Tail And A Retractable Landing Gear. The Prototype Flight Took Place On March 5, 1936. The Spitfire Proved To Be The Raf’S Staple Of The War, Which Continued To Do Well After The War, Remaining In Production For 10 Years. The History Of The Spitfire Began On The Drawing Desk Of Rj Mitchell, Supermarine’S Lead Designer. The First Machines Went To Raf Units In 1938, But When The Battle Of Britain Began In The Summer Of 1940, There Were Already 19 Squadrons Of Modern Fighters At The Airfields – Together With The Slightly Older Hurricanes Of The Islands, 600 Aircraft Were Defending. With The Expansion Of Hostilities, The Spitfire Served Wherever The Raf Operated In The Far East, North Africa And Italy, During The Normandy Landings And Fighting In France, And Finally During The Operation In Germany In 1945. For Many Britons, He Became A Symbol Of Victory In World War Ii. This Wonderful Machine Has At Least A Dozen Production Versions. The Most Important Of Them Are, Among Others The First Mass-Produced Spitfire Mk.I Powered By A 1030Hp Rolls-Royce Merlin Ii Engine. It Was Above All This Machine That Made Such An Excellent Contribution To The Battle Of Britain. Many Versions Of This Model Have Been Developed, Including Pr Mk Ia (Reconnaissance Version) Or Pr.Ig (Armed Reconnaissance Version). Another Interesting Version Was The Spitfire Mk.V With A Rolls-Royce Merlin 45 Engine With 1440Hp. Later, Merlin 50 Engines Were Also Assembled. Serial Production Of This Version Started In 1941 And Was The Raf’S Response To The Appearance Of The Messerschmitt Bf-109F. Another Very Successful Version Is The Spitfire Mk.Ix, Powered By A Merlin 61 Engine With A 4-Blade Propeller. It Was Created As An Opponent To The Focke-Wulf Fw-190 And Was Put Into Production At The End Of 1941. This Version Was Modified Many Times And, For Example, In 1944 It Got A New Gyro Sight, An Enlarged Rudder Or A Different Wing System. Another Major Version Is The Spitfire Mk.Xiv With A Rolls-Royce Griffon 61 Engine And A Five-Bladed Propeller. Serial Production Started In October 1943. One Of The Last Series Produced Was The Mk.21 Version. This Version Had A Griffon 61 Engine, A Strongly Reinforced Structure And Sheathing, The Wings Were Extended, Increasing Their Flying Surface. Mass Production Started In March 1945. Technical Data (Mk.Xiv Version): Length: 9.14M, Wingspan: 11.23M, Height: 3.05M, Maximum Speed: 717Km / H, Rate Of Climb: 18.5M / S, Practical Ceiling: 13,200M, Range Maximum: 1815 Km, Armament: Fixed – 4 7.7Mm Machine Guns And 2 20Mm Hispano Mk Ii Cannons, Suspended – Up To 225 Kg Of Bombs.

The Light Utility Car, Popularly Known As The Tilly, Was A Light British Military Transport Car From The Second World War. Tilly Was A Car That Was Created From A Combination Of Two Basic Elements. The Body Of This Car Was Constructed By Austin And Was Created As A Result Of A Combination Of A Two-Person Passenger Compartment With – Most Often – A Cargo Space Covered With A Tarpaulin. This Body, In Turn, Was Built On Various Types Of Car Chassis. However, These Were Always The Chassis Of Passenger Cars, Already Produced On A Relatively Large Scale, E.G. Austin 10 Grq, Hillman Minx Or Standard Flying 14. Placing Tilly On A Given Chassis Also Meant Giving A Different Name, E.G. Austin 8 Hp, Austin 10 Hp Or Morris 10 Hp. Cars Of This Type, Although Cheap And Simple To Build, Turned Out To Be Very Useful And Remained In Service In The 1950S. They Were Also Used By The Armed Forces Of Denmark And Portugal.