Electronics KOPROPO Ko Propo Kg-X Gyro

Kg-X Is Intelligent Steering Assist Gyro Unit Which Is Optimized For Use With Rwd Drift Car.

Next Generation Gyro System, Covering All Required Functions For Drift Cars, Such As Agc Function, End Point Adjust (Each L/R ) Function, Pca Function, Etc.&Nbsp;&Nbsp;

*Kg-X Is A Collaboration Product With Overdose Company.

Ags Restrains Vibration Of Servo!​

With A Conventional Gyro System, Servo Vibrations Occur When Increasing Gain Setting.

The Agc Function Equipped With Kg-X Enables To Stop The Vibration And Operate Servo Normally.

Independent Setting For Right And Left!

Kg-X Enables Settings Of End Point Of Servo Independently For Each Side(L/R). This Function Is Effective;

1) To Limit The Maximum Movement Angle Of Servo To Protect Linkage And Knuckle Etc. From Damage.

2) To Secure The Same Movement Angles For The Both End Points.

Settings Are To Be Kept Memorized Until Next Setting.

Feel Steerage Just As Wanted!​

Pca Is The Abbreviation Of Priority Control Adjuster. The Mixing Ratios Of The Gyro Signal And Steering Signal Can Be Changed. Steering Control Performance Can Be Obtained Without Feeling The Use Of The Gyro.

Remote Control Of Gain By 3Ch. Signal Input​

After Connecting 3Ch Input Port Of Kg-X To The Port Connect To 3Ch (Or 4Ch) Of The Receiver, The Gyro Gain Can Be Changed By Operating 3Ch (Or 4Ch) Of Transmitter While Driving A R/C Car.

&Nbsp;* Black Connection Cable (100Mm) No.36519 (Option) Is Required For The Connection.

This Is Example For Using Kg-X.&Nbsp;

&Nbsp;

Hcs Compatible.

Hcs (High Speed Communcation System) Is The New High Speed Communication System Between The Receiver To The Servo. The Hcs Mode Shortens Communication Time Of The Signal Which Is Compressed. Hcs Compatible Servos Are Disigned To Change Its Mode Automatically According To A Signal From Receiver To Operate With All Ko Receivers.&Nbsp;&Nbsp;

*Kg-X Initial Setting Is Required When Response Mode Is Changed.

Aluminum Case For Light Weight And High Stiffness With Cool Design.

The Outer Case Of Kg-X Is Made Of Aluminum.

After Alumite Processing, Extra Processing Of Milling And Laser Printing Are Applied To Make The Stylish Design More Attractive

Contents

Kg-X X1

Black Connection Cable( For 1Ch-In) X1

Specifications

– High Speed Response Compatible(Normal Mode/Hcs Mode)

– Ags Function

– End Point Adjustment

– Pca Function

– Input Channel: 2Ch (Steering Signal: 1Ch)

&Nbsp; * If You Want To Use Gain Setthing By Transmitter, Please Use 4Ch Transmitter.

– Operaing Voltage: 4.8 To 7.4V

– Dimensions: 20.0 X 24.0 X 14.0Mm

– Weight: 8.3G

– Aluminum Heavy Duty Outer Case

Compatible Products

– Any Ko Receivers

– Any Ko Servos

Recommend Categories

1/10 Electric Drift Car (Rwd/Awd), 1/10 Electric F-1, 1/10 Electric Touring Car

&Nbsp;

&Nbsp;

Made In Japan