Flight Controller | Parts Matek Matek – Flight Controller H743-Mini V3

Fc Specifications

• Mcu: Stm32H743Vit6, 480Mhz , 1Mb Ram, 2Mb Flash
• Board V3 Imu: Icm42688-P (Spi1) &Amp; Icm42605 (Spi4)
• Baro: Infineon Dps310 (I2C2)
• Osd: At7456E (Spi2)
• Blackbox: Microsd Card Socket (Sdio)
• 5.5X Uarts (1,2,4,6,7, Rx8)
• 11X Pwm Outputs
• 2X I2C (I2C1/Da1 Cl1 Pads, No I2C2 Breakout)
• 1X Can (C-H, C-L Pads)
• 5X Adc (Vbat, Current, Rssi, Vb2, Cu2)
• 3X Leds For Fc Status (Blue, Red) And 3.3V Indicator(Red)
• 1X Jst-Sh1.0_8Pin Connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
• Dual Camera Inputs Switch
• 8V Power On/Off Switch

Power

• Vbat Input: 6.3~36V (2~8S Lipo)
• Bec: 5V 1.5A Cont. (Max.2A)
• Bec: 8V 1.5A Cont. (Max.2A), &Nbsp; 8V Outputs Stable When Vbat≫=10V, &Nbsp;8V Outputs 80% Of Vbat When Vbat≪ 10V
• Ldo 3.3V: 200Ma
• Vb2 Pad Supports Max. 69V (Voltage Divider 1K:20K)
• Static Power: 200Ma@5V With Betaflight, &Nbsp;150Ma@5V With Ardupilot

Fc Firmware

• Ardupilot(Chibios): Matekh743
• Betaflight: Matekh743
• Inav: Matekh743

Physical

• Mounting
  20 X 20Mm/Φ3Mm With Silicon Grommets
  20 X 20Mm/Φ2Mm With Silicon &Amp; Brass Grommets
• Dimensions: &Nbsp;36 X 28 X 6.5Mm
• Weight: 7G

Including

• 1X H743-Mini
• 6X Silicon Grommets M4 To M3
• 6X Brass Grommets M3 To M2
• 1X Jst-Sh1.0_8Pin Cable, 5Cm
• 2X Jst-Sh1.0_8Pin Connectors

Layout

Wiring

Ardupilot Mapping

Ardupilot Relay (Pinio)

Bf Mapping

Tips

New Features For V3

&Nbsp;

&Nbsp;