On Road | Cars/Tanks Tamiya Tamiya – 1/10 Porsche 911 Gt3 Cup 2008 (Tt-01E Chassis) [47429] W/ Beginner Ready To Run Combo

Special Edition R/C Product
1/10 R/C Porsche 911 Gt3 Cup Vip 2008
(Tt-01 Type-E)
Item No: 47429


Length: 465Mm. Image Shows Painted And Assembled Kit, With Ps-55 Flat Clear Used.

Vip In The Building!
The 911 Gt3 Cup Car Was Developed For The Porsche Super Cup, A Single-Make Racing Series Gracing Circuits Around The World. The Vip Car Recreated By This Assembly Kit Was Run By Porsche Themselves And Was Driven Upon Invitation By A Different Driver According To The Race. Its Powerful Form And Rear Wing Are Recreated Expertly In Durable And Lightweight Polycarbonate, With Separately Molded Side Mirror Parts, Plus Metal-Plated Light Cases That Allow The Installation Of Separately Sold Leds Front And Rear. Stickers Are Included In The Kit To Recreate Numerous Sponsor Logos And Other Markings.

&Nbsp;

★Left: The Glamorous, Racy Form Of The Car Is Recreated Faithfully In Durable And Lightweight Polycarbonate.

★Right: Side Mirrors Are Components Molded Separately In Plastic To Give Your Car An Extra Touch Of Authenticity.

&Nbsp;

★Left: Mesh Type Wheels Are Paired With High Performance Slick Tires, And Stickers Are Included For Tire Logos.

★Right: At The Rear, The Car’S “Duck Tail” Design Is Accurately Captured, And The Rear Wing Is Also Polycarbonate.

&Nbsp;

Evolved Chassis
The Bathtub Frame Of The Evolved Shaft-Driven 4Wd Tt-01 Type-E Has Its Motor And Battery Close To The Ground For Lower Center Of Gravity And Optimum Balance. Mounted On The Bathtub Frame Is A Fiberglass Reinforced Nylon Upper Deck And Gear Covers Improving Rigidity, As Well As A Three-Piece Tie Rod Providing Smooth Steering Action. The Low Center Of Gravity, Highly Balanced Design, 4-Wheel Double Wishbone Suspension System, And Front And Rear Differential Gears All Come Together To Produce An Excellent Drive. Mesh Designs Wheels Are Paired With Racing Slick Tires For The Finishing Touch, While A Host Of Hop-Up Option Parts Are Available To Soup Up The Tt-01 Type-E!

&Nbsp;

★Left: Dedicated Tt-01 Type-E Upright Designs Offer Excellent Reliability And Fit That Translates Into A Great, Long-Lasting Drive.

★Right: A Three-Piece Steering Tie Rod Setup Employs Aluminum Pipes For Superior Parts Fit And Smooth Steering Motion.

&Nbsp;

★Left: This Image Shows An Example Of How Drivers In R/C Races Can Use The Included Transponder Stay When Setting Up Their Car.

★Right: Damper Stay And Gear Cover Are Separate Parts; The Stay Features Two Different Damper Attachment Holes To Choose From.

&Nbsp;

Specifications
★Length: 465Mm, Width: 195Mm, Height: 134Mm ★Wheelbase: 251Mm ★Tread: 157Mm (Front), 165Mm (Rear) ★Tire Width/Diameter: 27/67Mm ★Bathtub Type Chassis Frame ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4Wd ★F/R 3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio=8.35:1 ★Type 540 Motor ★Requires An Electronic Speed Controller (Sold Separately)

&Nbsp;

Separately Required Items
★2-Channel R/C System W/Esc ★R6/Aa/Um3 Batteries For Transmitter ★Battery Pack &Amp; Charger

This Combo Includes:

Rrp: $85.00

1X Dhk 2 Channel Radio And Receiver

Rrp:$39.00

1X Giant Power 7.2V 2000Mah Ni-Mh Battery

Rrp:$25.00

1X 500Ma Ni-Mh Battery Charger

Rrp:$32.00

1X Omg 7Kg Plastic Gear Servo

&Nbsp;

Total Value: $181.00