Planes FMS Fms 1400Mm Aerobatic 3D F3A Olymmpus Pnp

1400Mm F3A Olympus Pnp

Description:

The Build Quality Is Outstanding. Minimal Glue Was Required To Build This Plane And Everything Screwed Together With Ease. The Servos Are All 17G Digital Metal Gear For Precision And Durability. The Ducting Is Sufficient For Maximum Airflow To Cool The Electronics. Building Was Pretty Much A Non-Event. The Wing And Elevator Are Two Pieces And Go Together Quickly Without Hassle. The Main Wing Uses Two Tubular Carbon Fiber Spars, And Their Plastic Mounting Shrouds Are Well Aligned. The Main Wing Needed Zero Adjustment, While The Elevator’S Port Spar Mounting Shroud Was 2 Degrees Off 180. Compressing The Foam At The Junction Point Was Enough To Seat The Elevator Back To Flush. We Completed The Task In A Little Over An Hour.

Fms F3A Flight Review

We Flew The F3A Using A 6S 4000Mah Lipo Pack And We Also Flew It Using A 5S 4000Mah Lipo Pack. We Felt The 5S Was A Little Better For 3D While The 6S Was Good For Sport Flying. We Found Knife Edges Were Very Stable And The Control Surfaces Are Large Enough To Hold F3A Patterns. We Were Able To Do Snap Rolls And Everything You Would Expect From An F3A Pattern Plane Using Either Battery. Flight Duration Was Between 6 And 8 Min Depending On How Much Throttle We Were Using. Power From The 2 Blade Prop Was Adequate. We Recommend Removing The Y Cables For Ailerons Which Will Allow You To Subtrim The Individual Aileron Servos To Perfection.

Features:

• Fully Hinged Rudder Using Dubro Style Hinges (Superior To Foam Hinges)

• High Performance 550Kv Paep Motor

• 60 Amp Esc

• 2 Blade 15 X 8 Prop For Enhanced Performance

• Carbon Spars And Epo Foam Construction Provide The Perfect Balance Between Strength And Flexibility

• Outrunner Motor, Servos, And Esc Come Pre-Installed For Your Convenience

• Easy To Complete, Bolt-On Final Assembly

• Exceptionally Strong 55 Times Epo Foam

• High-Output, 4250 Kv550 Paep Brand High Performance Motor Installed

• Digital High-Speed, 17G Digital Metal Gear Servos Installed

• Fully-Hinged Control Surfaces With Control Links Installed

• Modern Cockpit Details And Pilot Bust Installed

• Efficient Interior Ducting Provides Generous Component Cooling

• Small Up Wing To Make The Performance Better

• Large Scale, Stable Flight Platform Handles Windy Condition.

• Large, Scale Control Surfaces For Aerobatic Flight

• Spacious Battery Compartment Gives Pilots The Option Of Flying Light Weight 5S Batteries For Full 3D Or * Larger 6S Batteries For More Sport And Longer Run Times

• Strong Landing Gear To Hand Hard

• Pinned Rudder Hinges

Specifications:

Required:

• 4-6 Channel Radio System

• 6 Cell 22.2V 4000 Mah Lipo Battery

• Lipo Battery Charger