Xv-02 Pro Chassis Kit
Item No: 58707
This Shaft-Driven 4Wd Chassis Kit Features A Front Midship Motor And Transmits Power From The Spur Gear In The Center Via Identical Length Front And Rear Long Propeller Shafts, Which Allows Running On Surfaces From On-Road To Flat Dirt. 39T Differential Gears Front And Rear, And One Setup Option 40T Differential Gear Are Included, Facilitating Changes To Drive Balance. It Features Optimum Balance And A Slim Chassis, Plus 4-Wheel Independent Double Wishbone Suspension With Aluminum-Cylinder Long Oil Dampers.
&Nbsp;
★A Responsive, Robust Steering Setup Features Aluminum Servo Stay, Hi-Torque Servo Saver, And Turnbuckle Steering Rod For Quick Fine-Tuning.
★This Image Goes Close-Up On The Front Double-Wishbone Suspension, Which Features Caster Blocks With An Angle Of Six Degrees.
★Long Dampers With Aluminum Cylinders Expertly Cushion The Chassis. Upper Turnbuckle Arms And Universal Drive Shafts Come As Standard.
&Nbsp;
★Power From The Front-Midship Motor Goes To The Front And Rear Of The Chassis Via A Pair Of Indentical Length Propeller Shafts.
★Front And Rear Sealed Gearboxes Each Contain A Gear Differential For Superior Performance; Change Their Oil To Fine-Tune Setup.
★The Double Wishbone Rear Suspension Is Pictured Here. With Use Of Separately Sold&Nbsp;Item 53539, Upper Arm Position Can Be Adjusted.
&Nbsp;
★The Rear Of The Model Is Also Fitted With High Performance Long Dampers That Employ Precision Aluminum Cylinders And Blue Caps.
★The Longitudinally-Positioned Battery Is On Its Side, Contributing To The Narrow Chassis. It Is Secured Via Lever Design Battery Holders.
★This Profile View Of The Xv-02 Pro Shows Just How Low-Profile The Chassis Is, While Stil Maintaining Considerable Ground Clearance.
&Nbsp;
★White Dish Wheels Are Paired With Rally Block Tires That Give A Controllable Drive On-Road And On Flat Dirt.
★The Flat Chassis Bottom And Skid Angle On The Front Bumper Further Contribute To Flat Dirt Performance.
★Attached With Sponge Tape, The Included Polycarbonate Chassis Cover Helps Keep Stones Out Of The Chassis.
&Nbsp;
Drivetrain: ●Full Ball Bearings ●Aluminum Propeller Shafts (Front/Rear) ●Oil-Filled Gear Differentials (Front/Rear, Two 39T And One 40T Included) ●Universal Drive Shafts (Front/Rear)
Suspension: ●Aluminum Long Dampers (Front/Rear, With Blue Caps) ●6-Degree Caster Blocks ●Turnbuckle Shaft Upper Arms
Chassis: ●Front Bumper With Skid Angle ●Polycarbonate Chassis Cover ●Aluminum Servo Mount ●Hi-Torque Servo Saver
&Nbsp;
★Length: 368Mm, Width: 180Mm ★Wheelbase: 257Mm ★Bathtub Frame ★Front-Midship Motor, Shaft-Driven 4Wd ★Oil-Filled Gear Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★Long Oil Dampers With Aluminum Cylinders ★Gear Ratio (With Kit-Standard 19T Pinion) = 9.58:1 (14 Ratios Between 10.71:1 And 6.28:1 Possible With Separately Sold Pinions) ★Hobbywing Electronic Speed Controller&Nbsp;
&Nbsp;
★Body ★Type 540 Motor ★2-Channel R/C System&Nbsp; ★R6/Aa/Um3 Batteries For Transmitter ★Battery Pack &Amp; Charger
Reviews
There are no reviews yet.